Why does my HotSpring Hot Spot SX have a water odor?
If you notice a water odor in your HotSpring Hot Tub, it could be due to excessive organics in the water or improper sanitization; in either case, shock the spa with sanitizer or add sanitizer. Another possibility is low pH, which can be resolved by adjusting the pH to the recommended range.
Why is my HotSpring Hot Tub water cloudy?
Cloudy water in your HotSpring Hot Tub can result from several factors. It may be caused by dirty filters, so cleaning them is a good first step. Excessive oils or organic matter can also be the culprit, in which case you should shock the spa with sanitizer. Other potential causes include improper sanitization (add sanitizer), suspended particles or organic matter (adjust pH and/or alkalinity), or overused water (drain and refill the spa).
General| Heater | 4kW |
|---|---|
| Ozone System | Optional |
| Shell Material | Polymer |
| Energy Efficiency | Certified to the APSP 14 national standard |
| Pump 1 | 1.5 HP |
| Filtration System | Tri-X |
| Lighting System | LED |
| Voltage | 240V |
| Cabinet Material | Polymer |
| Warranty | 5-Year Shell Structure |
| Pump | 1.5 HP |
| Filtration | Tri-X |
Covers essential safety warnings for children, electrocution, and general injury prevention.
Details risks related to hyperthermia, medication, health conditions, and hygiene.
Provides guidance on cleaning the spa shell and safe chemical handling practices.
Outlines requirements for spa placement, including foundation types and structural support.
Details voltage selection, wiring, and conversion procedures for spa power.
Explains how to properly level the spa and install the safety cover.
Provides specifications and overhead views for Tempo, Relay, and Rhythm spa models.
Offers specifications and overhead views for the SX and TX spa models.
Guides users through initial spa setup, refilling, heating, and system operation modes.
Explains the functions of the spa control panel, including modes, locking features, and display.
Details the control panel for SX/TX models and the operation of the optional audio system.
Covers methods for testing spa water and essential chemical handling safety.
Outlines procedures for balancing Total Alkalinity, Calcium Hardness, and pH.
Discusses maintaining proper sanitizer levels and the use of various water care systems.
Provides instructions for cleaning spa filters, pillows, and the acrylic shell.
Guides on caring for the spa cover, cabinet, and procedures for draining the spa.
Explains how to prepare the spa for cold weather and winter storage.
Addresses common spa operational problems and their solutions.
Provides solutions for issues related to water clarity, odor, and chemical balance.
Covers warranty information, liability disclaimers, and customer support contacts.
To Next Page
