OPERATING PRINCIPALS
The device uses digital electronic gyroscopes and acceleration
sensors to control balance and motion, depending on the user's
center of gravity. The device also uses a control system to drive the
motors that are located within the wheels. The device has a built-in
inertia dynamic stabilization system that can help assist with balance
when moving forward and backwards, but not while turning.
TIP – To increase your stability, you must shift your weight in order to
overcome the centrifugal force during turns, especially when
entering a turn at higher speeds.
Model: HY-BEAST
Net Weight: 27.43 lbs (12.44 kg)
Load: 44-330 lbs (20-150 kg)
Max Speed: Up to 7.45 mph (12 km/h)
Max Distance Range: Up to 8.4 miles (13.5 km)
Max Incline Angle: 15° degrees
Minimum Turning Radius: 0°
Battery Type: Lithium-ion
Battery Voltage: 36 V
Battery Capacity: 4.0 Ah
Power Requirement: AC 100-240V, 50/60 Hz
Wheel Size: 10 Inches (25.4 cm)
Product size: 28.35x10.63x11.42inch
(720x270x290mm)
Bluetooth Range: Up to 33ft
Bluetooth Speaker: V4.0 with stereo sound quality
BT ID: D036974
The Hover-1 Beast is a personal transporter. Our technology and
production processes are developed with strict testing for each
Beast scooter. Operating the Beast without following the contents of
this manual may lead to damage to your Beast, or bodily injury.
This manual is designed to give you the information you need for the
safe operation and maintenance of your Beast. Please read it
thoroughly before riding your Beast.
PACKAGE CONTENTS
• Hover-1 Beast Electric Scooter
• 3-pin Charge Cable
• Operation Manual
FEATURES/PARTS
1. Fender 7. LED Light
2. Left Foot Mat 8. Power Button
3. Running Indicator 9. Charge Port (located in rear)
4. Battery Indicator 10. Battery Cover
5. Right Foot Mat 11. Wireless Speaker
6. Tire
SPECIFICATIONS
WARNING
Any Hover-1 Beast that does not work
properly can cause you to lose control and
fall. Inspect the entire device thoroughly
before every ride, and do not ride it until any
problems have been corrected.
5
To Next Page
Loading...
