EasyManua.ls Logo

Hover-1 CHARGER - Balance and Calibration Steps

Hover-1 CHARGER
26 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WARNING
Ovaweight exa-fion on the device may
increase possblTliyof injuryor product damage.
NOTES:
To prevent injury, when max speed is
reached, the hoverboard will beep to
alert the User and tilt the rider slowly back.
OPERATING RANGE
The hoverboard can travel a distance up to 8 miles on a fully
charged battery in ideal conditions. The following are some of the
major factors that will affect the operating range of your device.
Terrain: Riding distance is highest when riding on a smooth, flat
surface. Riding uphill and/or on rough terrain will reduce distance
significantly.
Weight: A lighter user will have further range than a heavier user.
ternperature: Please ride and store the device under
recommended temperatures, which will increase driving distance;
battery life, and overall performance of your device.
Speed and Riding Style: Maintaining a moderate and consistent
speed while riding produces maximum distance. Traveling at high
speeds for extended periods, frequent starts and stops, idling and
frequent acceleration or deceleration will decrease overall
distance.
BALANCE & CALIBRATION
If your hoverboard is unbalanced, vibrating, or not turning properly,
you can follow the below steps to calibrate it.
First, place the hoverboard on a flat, horizontal surface such as the
floor or a table. The foot mats should be even with each other and
not tilted forward or backward. Make SIJrethe charger is not
plugged in and the board is turned off.
Press and hold the ON/OFF button for a total of 15 seconds. The
scooter will turn on, lighting the battery indicator on the board.
Turn the board off and then turn the board back on. Press the
power button twice. Calibration will now be completed.
16

Related product manuals