OPERATING PRINCIPALS
The Dream uses digital electronic gyroscopes and acceleration
sensors to control balance and motion, depending on the user's
center of gravity. The Dream also uses a control system to drive the
motors that are located within the wheels. The Dream has a built-in
inertia dynamic stabilization system that can help assist with balance
when moving forward and backwards, but not while turning.
TIP – To increase your stability, you must shift your weight in order to
overcome the centrifugal force during turns, especially when
entering a turn at higher speeds.
Model: Hover-1
™
Dream (H1-DRM)
Net Weight: 16.3 lbs (7.4 kg)
Load: 44-220 lbs (20-100 kg)
Max Speed: Up to 7 mph (11.3 km/h)
Max Distance Range: Up to 6 miles (9.7 km)
Max Incline Angle: 10°
Minimum Turning Radius: 0°
Charge Time: Up to 5 hours
Battery Type: Lithium-ion
Battery Voltage: 25.2 V
Battery Capacity: 4.0Ah
Power Requirement: AC 100-240V, 50/60Hz
Ground Clearance: 1 Inches (2.54 cm)
Tire Type: Non-Pneumatic Solid Tires
UL Certification: UL 2272 approved
The Hover-1 Dream is a personal transporter. Our technology and
production processes are developed with strict testing for each
Dream scooter. Operating the Dream without following the contents
of this manual may lead to damage to your Dream or bodily injury.
This manual is designed to give you the information you need for the
safe operation and maintenance of your Dream. Please read it
thoroughly before riding your Dream.
PACKAGE CONTENTS
• Hover-1 Dream Electric Scooter
• Wall Charger
• Operation Manual
FEATURES/PARTS
1. Fender 5. Tire
2. Left Foot Mat 6. Power Button
3. Battery Indicator 7. Charge Port
4. Right Foot Mat 8. Protective Chassis Casing
4
1 1
5
5
6
7
2
3
4
8
INTRODUCTION
To Next Page
Loading...
