Hover-1 HELIOS - Warranty and Error Codes; Warranty Information Details; Troubleshooting Error Codes

For warranty information, please visit us at www.hover-1.com
WARRANTY
Error codes
Error code E1- motor hall failure, the motor needs to
be replaced
Error code E2 - accelerator failure, the accelerator
needs to be replaced
Error code E3 - motor blocking fault, release the
accelerator
Error code E4/MOS - mainboard MOS tube failure, the
mainboard needs to be replaced
Error code E6 - controller / instrument communication
failure, the controller needs to be replaced
Error code E7 - battery over-voltage protection, the
battery needs to be replaced
Error code E9 - brake failure, the brake needs to be replaced
Error code E8 - controller error, the controller needs to be
replaced
Aix Serial Number Label Here:
Manufacturer: DGL Group, Ltd.
2045 Lincoln Highway, Edison, NJ 08817
TEL: 7326925000
27