OPERATING PRINCIPALS
The i-200 Uses digital electronic gyroscopes and acceleration sensors
to control balance and motion, depending on the user's center of
gravity. The i-200 also Uses a control system to drive the motors that
are located within the wheels. The i-200 has a built-in inertia dynamic
stabilization system that can help assist with balance when moving
forward and backwards, but not while turning.
TIP - To increase your stability, you must shift your weight in order to
overcome the centrifugal force during turns, especially when
entering a turn at higher speeds.
WARNING
Any i-200 that does not work properly
can cause you to lose control and fall.
Inspect the entire i-200 thoroughly
before every ride, and do not ride it until
any problems have been corrected.
SPECIFICATIONS
Model:
Net Weight:
Load:
Max Speed:
Max Distance Range:
Max Incline Angle:
Minimum Turning Radius:
Charge Time:
Battery Type:
Battery Voltage:
Battery Capacity:
Power Requirement:
Ground Clearance:
Platform Height:
Tire Type:
FCC D:
(866) 831-1520
Hover-I TMi-200 (H -200)
14.5 lbs (6.6 kg)
44-160 lbs (20-72.5 kg)
Up to 7mph (l I .2 km/h)
Up to 6 miles (9.65 km)
80
00
Up to 6 hours
Lithium-ion
36 v
2.0 Ah
AC IOO-240V, 50/60 Hz
I .81 Inches (4.6 cm)
4.72 Inches (12 cm)
Non-Pneumatic Solid Tires
D044460
2AANZ200
5
To Next Page
Loading...
