Please visit
www.hover-1.eu/troubleshoot
to request missing
or defective parts
2. Secure your Hover-1 Kart to your self-balancing scooter using both adjustable straps with rubber protectors.
Attach one end of each strap to the holes on the front of each pedal mount as shown below.
Wrap one set of adjustable straps under your self-balancing scooter and attach the ends of the straps on the
back of each pedal mount. The rubber protectors on the straps should be centered underneath the scooter,
with side B facing the ground.
10
To Next Page
Loading...
