Hover-1 MY FIRST E-BIKE - Before Riding Procedures; Pre-Ride Checklist

It is important that you fully understand all functions of your My First
EBike. If these functions are not used correctly, you will not have full
control of your My First EBike.
Practice using your My First EBike at slower speeds in a lat, open area
until you are comfortable riding it.
PRE-RIDE CHECKLIST
Ensure that your My First EBike is in proper working order each and every
time you ride. If a part of the EBike does not function correctly, please
contact our Customer Support Center.
• Ensure the battery is fully charged before riding your EBike.
• Please wear all appropriate safety gear before operating your My First
EBike.
• Make sure to wear comfortable clothes and lat closed-toe shoes when
operating your device.
BEFORE RIDING
WARNING
Any My First EBike that does not work
properly can cause you to lose control and
crash. Do not ride a My First EBike with a
part that is damaged. Replace the damaged
part before riding.
E
5. Increase the strength of the brake by twisting the
threaded stud (indicated in blue) counterclockwise to
create a gap between it and the nut indicated in gray.
The larger the gap between the threaded stud and
the nut, the more stopping power the brakes will
provide. Make sure the gray nut is twisted clockwise
until it is secured tightly to side of the brake handle.
Be careful not to give the brakes too much stopping
power, as it could cause the EBike to tip forward
when braking at higher speeds.
8