Hover-1 MY FIRST E-BIKE - Care and Maintenance

• To avoid damage to the EBike’s internal circuitry, do not expose it to
liquid, moisture, or humidity.
• Do not use abrasive cleaning solvents to clean the EBike.
• Do not expose the EBike to extremely high or low temperatures, as this
will shorten the life of the device, destroy the battery, and/or distort certain
plastic parts.
• Do not dispose of the EBike in ire as it may explode or combust.
• Do not let the EBike come into contact with sharp objects, as this will
cause scratches and damage.
• Do not let the EBike fall from high places, as doing so may damage the
internal circuitry.
• Do not attempt to disassemble the EBike.
• Occassionally check the EBike’s screws and tighten them if needed.
• Fully charge the battery before your irst use.
• Be sure to charge the EBike soon after depleting the battery. Leaving
the battery dead for extended periods of time could shorten the battery
life or cause it to fail.
• If the EBike is not used for an extended period of time, make sure to
charge it every 2 months to maintain the battery life.
• Use only the charger provided by Hover-1.
• Damage to the battery and/or charger due to abnormal factors such as
water, collision, etc., is not covered by the warranty.
CARE & MAINTENANCE
WARNING
Avoid using water or other liquids for
cleaning. If water or other liquids enter
the My First EBike, it will cause
permanent damage to the internal
components.
WARNING
Users who disassemble the My
First EBike without permission
from Hover-1 will void the warranty.
18