Hover-1 MY FIRST E-SCOOTER - General Care and Maintenance

• To avoid damage to the EScooter’s internal circuitry, do not expose it to
liquid, moisture, or humidity.
• Do not use abrasive cleaning solvents to clean the EScooter.
• Do not expose the EScooter to extremely high or low temperatures, as
this will shorten the life of the device, destroy the battery, and/or distort
certain plastic parts.
• Do not dispose of the EScooter in ire as it may explode or combust.
• Do not let the EScooter come into contact with sharp objects, as this will
cause scratches and damage.
• Do not let the EScooter fall from high places, as doing so may damage
the internal circuitry.
• Do not attempt to disassemble the EScooter.
• Use only the charger provided by Hover-1.
• Use only the manufacturer’s authorized replacement parts.
CARE & MAINTENANCE
WARNING
To reduce the risk of injury, adult supervision is
required. Never use in roadways, near motor vehicles,
on or near steep inclines or steps, swimming pools, or
other bodies of water. Always wear shoes, and never allow
more than one rider at a time.
WARNING
Avoid using water or other liquids for cleaning. If water or
other liquids enter the EScooter, it will cause permanent
damage to the internal components.
WARNING
Users who disassemble the EScooter without permission
from Hover-1 will void the warranty.
11