CONTROLS AND ADJUSTMENTS
POWER BUTTON
Power ON - Press the power button once while the EScooter is turned o
Power OFF - Press the power button once while the EScooter is turned on
THROTTLE
Press and hold the throttle button to accelerate. Make sure you have both
feet secured on the EScooter before you use the throttle.
HANDLEBAR HEIGHT ADJUSTMENT
To adjust the handlebar height, open the locking clamp, then press and
hold the silver peg poking out from the steering column. Lift the
handlebars up or push them down to adjust their height. Make sure the
silver peg clicks into place. Close the locking clamp when inished.
17
To Next Page
Loading...
