Before each use, the EScooter operator shall perform the
pre-operation checks as speciied below:
• The area that the unit is to be operated in is safe and suitable for safe
operation.
• The braking system is functioning properly.
• All safety lables are in place and understood by the operator.
• Any and all axle guards or other covers and guards supplied by the
manufacturer are in place and in serviceable condition.
• The wheels are in good condition.
It is important that you fully understand all the functions of your EScooter.
If these functions are not used correctly, you will not have full control of
your EScooter.
Practice using the EScooter at slower speeds in a lat, open area before
taking it out into public areas.
PRE-RIDE CHECKLIST
Ensure that your EScooter is in proper working order each time you ride.
If a part of the EScooter does not function correctly, please contact our
Customer Support Center.
• Ensure the battery is fully charged before riding your EScooter.
• Please wear all appropriate safety and protective gear before operating
your EScooter.
• Make sure to wear comfortable clothes and lat, closed-toe shoes when
operating your EScooter.
BEFORE RIDING
WARNING
Any EScooter that does not work properly
can cause you to lose control and fall. Do
not ride an EScooter with a part that is
damaged. Replace the damaged part
before riding.
HANDLEBAR HEIGHT ADJUSTMENT
To adjust the handlebar height, open the locking clamp, then press and
hold the silver peg poking out from the steering column. Lift the
handlebars up or push them down to adjust their height. Make sure the
silver peg clicks into place. Close the locking clamp when inished.
18
To Next Page
Loading...
