EasyManua.ls Logo

Hover-1 RANGER - Bluetooth Speaker and Audio Playback; Pairing the Speaker

Hover-1 RANGER
27 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BLUETOOTH SPEAKER
The Ranger has a powerful built-in wireless speakers so you can play
your music while riding.
PAIRING THE SPEAKER
I ) Turn on your Ranger and the speakers will "Ping" to announce that
it's waiting for a Bluetooth0 connection. Thiswill indicate your Ranger
speaker is now in pairing mode.
2) Place the Ranger and the Bluetooth@ device to which you would
like to pair it within the operating distance. We recommend keeping
the two devices no further than 3 feet apart during pairing.
3) Ensure Bluetooth@ isenabled on your phone or music device. Refer
to manufacturer's instructions for how to enable Bluetooth0 on your
4) Once you have activated Bluetooth0 on your device, select the
option "HI -RNGE" from the list of available Bluetooth@ devices.
5) If required, enter the PIN code 1'000000' and confirm the entry.
6) The Ranger will say "Paired" when successfully paired.
7) Please note, pairing mode on the Ranger will last for two minutes. If
no devices are paired after two minutes, the Ranger speaker will
automatically return to standby mode.
8) If pairing is UnsuccessfUI, turn off the Ranger first and re-pair
following the aforementioned steps.
9) If your smart phone isout of range, or the battery is low on your
Ranger, your speaker may disconnect from your smart device, and
the Ranger will say "Disconnected." To reconnect, follow the
aforementioned steps, or recharge your scooter.
NOTE: Once you have paired the Ranger speaker with a device, the
speaker will remember this device and will pair automatically when
the device's Bluetooth@ is activated and in range. You do not need
to re-pair any previously connected devices.
Your scooter can pair up to two multi-point devices. You can
reconnect a previously paired device without going through the
pairing or PIN process on up to two devices.
LISTENING TO MUSIC
Once the Ranger Bluetooth speaker is paired to your device, you
can stream music wirelessly through it. Only one speaker will play
music as the other speaker is strictly for safety alerts from your Hover-I .
Select the track you wish to listen to on your device to listen via the
speaker. All volume and track controls will be made using your music
device. Should you encounter any problems while streaming, please
refer to your device's user manual.
7

Related product manuals