10
www.howdens.com
Planning dimensions - Profile kitchens
Kitchen installation manual
Planning dimensions - Larder
170mm
720mm
30mm
A
A
C
C
B
B
290mm
390mm
Wall hanging
brackets
Wall fixings
Base cabinet
fixing bracket
575mm
600mm
890mm
920mm
1942mm
2122mm
720mm (full height)
557mm (standard)
900mm (extra tall)
472mm
434mm
(based on 38mm worktop)
2112mm (standard)
2292mm (extra tall)
Concealed wall hanging
bracket (deep wall only)
CONSIDERATIONS
• Worktop height is elevated by 30mm due to the profile application compared to other kitchen ranges.
• Tower/larder applications require a 30mm spacing each side to allow for the profile fitting.
• Pelmet rail should not be used on this handle-less style kitchen range.
• Appliance/larder towers are left and right handed depending on the door opening preference.
• When fitting two half height cabinets on top of each other, the top opening door will require a magnetic catch – push to open.
• Use 25mm screws for 12mm decor ends.
A
To Next Page
Loading...
