What to do if my Hoymiles HMS-1800-4T has a firmware error?
Check if the Hoymiles Inverter firmware is correct and has been upgraded. Then, check the communication between the DTU and the Hoymiles monitoring system, and between the DTU and the microinverter. Try again after checking the communication. If the fault persists, further assistance may be needed.
What to do if my Hoymiles HMS-1800-4T Inverter shows grid overvoltage?
If the Hoymiles Inverter alarm occurs occasionally, the grid voltage may be temporarily abnormal, and the microinverter should automatically recover once the grid voltage returns to normal. If the alarm occurs frequently, verify that the grid voltage is within the acceptable range. If it's not, contact your local power operator or, with their consent, adjust the grid overvoltage protection limit in the grid profile via the Hoymiles monitoring system.
What to do if my Hoymiles Inverter shows 10 min value grid overvoltage?
If the Hoymiles Inverter alarm occurs occasionally, the grid voltage may be temporarily abnormal, and the microinverter should automatically recover once the grid voltage returns to normal. If the alarm occurs frequently, verify that the grid voltage is within the acceptable range. If it's not, contact your local power operator or adjust the grid overvoltage protection limit via Hoymiles monitoring system with their consent.
Why is my Hoymiles HMS-1800-4T offline?
First, ensure the Hoymiles microinverter is working correctly by checking if the DC voltage is within the normal range and confirming the LED indicator status. Next, verify that the serial number (SN) on the microinverter label matches the one on the monitoring platform. Then, check the communication status between the DTU and the Hoymiles monitoring system, as well as between the DTU and the microinverter. If the communication is poor, try to improve it. If the alarm persists and cannot be resolved, further assistance may be needed.
How to troubleshoot over temperature protection on a Hoymiles HMS-1800-4T?
Check the ventilation and ambient temperature at the Hoymiles microinverter's installation location. If ventilation is poor or the ambient temperature exceeds the limit, improve ventilation and heat dissipation. If the problem persists with adequate ventilation and temperature, further assistance may be needed.
What to do if my Hoymiles HMS-1800-4T Inverter was shut down by remote control?
Check the status of zero export management and whether the Hoymiles microinverters were manually shut down. If the alarm still persists, further assistance may be needed.
What to do if there is a grid configuration parameter error on my Hoymiles HMS-1800-4T?
Check if the grid configuration parameter is correct and upgrade it. If the fault still exists, further assistance may be needed.
Manual purpose for specific models, emphasizing qualified technicians for installation and maintenance.
Product information subject to change; refer to the website for the latest version.
Lists microinverter models and identifies the manual's intended audience (qualified technicians).
Explains safety symbols and addresses FCC radio interference compliance and mitigation.
Critical safety precautions for installation, operation, and maintenance by qualified personnel.
Details symbols for waste disposal, voltage, temperature, certifications, and manual reference.
Describes a typical grid-tied PV inverter system components and function.
Explains microinverters, MPPT, module-level monitoring, and safety features.
Details 4-in-1 microinverter design, connection to four PV modules, and peak power.
Explains Sub-1G for stable, long-range, low-interference communication.
Lists main features like peak power, efficiency, power factor, and reliability.
Identifies the Sub-1G Wireless Terminal, DC Connectors, and AC Sub Connector.
Provides physical dimensions of the microinverter with a diagram.
Specifies optimal placement, avoiding environmental factors, and ensuring ventilation space.
Guidelines for connecting PV modules to the microinverter and using extension cables.
Lists necessary tools for installation, including screwdrivers, pliers, and safety gear.
Details maximum microinverters per AC branch based on voltage and cable type.
Lists precautions for installation, environmental conditions, and interference avoidance.
Lists and illustrates accessories required for installation, noting they are purchased separately.
Details marking positions, fixing screws, and mounting the microinverter.
Guides on selecting, preparing, and assembling AC Trunk Cables for microinverter connection.
Instructions for connecting AC connectors, distribution box wiring, and port capping.
Steps for documenting microinverter locations using serial numbers.
Guides on connecting PV modules and turning on the system's AC breakers.
Directs users to manuals for DTU and S-Miles Cloud monitoring setup.
A table of error codes, statuses, and handling suggestions for microinverter problems.
Continues troubleshooting for grid over/undervoltage, frequency, and input over/undervoltage.
Continues troubleshooting for input issues, abnormal wiring, and general device failure.
Explains LED signals during startup and operation for diagnosing issues.
Step-by-step inspection guide for qualified installers to troubleshoot malfunctioning units.
Outlines maintenance, safety, and cleaning procedures for optimal performance.
Details how to remove a microinverter and update its information in the monitoring platform.
Steps for disconnecting, removing, and packaging the microinverter.
Procedures for safe storage and transportation, including inspection.
Guidance on proper disposal of microinverters according to local regulations.
Comprehensive table of technical specifications for the microinverter models.
Explains grid support functions, compliance, and measurement accuracy.
Details voltage ride-through parameters and trip settings for various voltage conditions.
Details frequency ride-through parameters and trip settings for various frequency conditions.
Specifies adjustment ranges and tolerances for ramp rate and soft start features.
Defines adjustment ranges for inductive and capacitive power factors.
Provides output power and reactive power settings for different models.
Details output power and accuracy for frequency-watt control.
Details output power and accuracy for volt-watt control.
A template for documenting microinverter installation details and locations.
Illustrates the wiring diagram for a 120VAC/240VAC split-phase system.
Illustrates the wiring diagram for a 120VAC/208VAC three-phase system.
To Next Page
General