What to do if my Hoymiles Inverter has a firmware error?
Check if the Hoymiles Inverter firmware is correct and has been upgraded. Then, check the communication between the DTU and the Hoymiles monitoring system, and between the DTU and the microinverter. Try again after checking the communication. If the fault persists, further assistance may be needed.
What to do if my Hoymiles HMS-1600-4T-NA Inverter shows grid overvoltage?
If the Hoymiles Inverter alarm occurs occasionally, the grid voltage may be temporarily abnormal, and the microinverter should automatically recover once the grid voltage returns to normal. If the alarm occurs frequently, verify that the grid voltage is within the acceptable range. If it's not, contact your local power operator or, with their consent, adjust the grid overvoltage protection limit in the grid profile via the Hoymiles monitoring system.
What to do if my Hoymiles HMS-1600-4T-NA shows 10 min value grid overvoltage?
If the Hoymiles Inverter alarm occurs occasionally, the grid voltage may be temporarily abnormal, and the microinverter should automatically recover once the grid voltage returns to normal. If the alarm occurs frequently, verify that the grid voltage is within the acceptable range. If it's not, contact your local power operator or adjust the grid overvoltage protection limit via Hoymiles monitoring system with their consent.
Why is my Hoymiles Inverter offline?
First, ensure the Hoymiles microinverter is working correctly by checking if the DC voltage is within the normal range and confirming the LED indicator status. Next, verify that the serial number (SN) on the microinverter label matches the one on the monitoring platform. Then, check the communication status between the DTU and the Hoymiles monitoring system, as well as between the DTU and the microinverter. If the communication is poor, try to improve it. If the alarm persists and cannot be resolved, further assistance may be needed.
How to troubleshoot over temperature protection on a Hoymiles HMS-1600-4T-NA?
Check the ventilation and ambient temperature at the Hoymiles microinverter's installation location. If ventilation is poor or the ambient temperature exceeds the limit, improve ventilation and heat dissipation. If the problem persists with adequate ventilation and temperature, further assistance may be needed.
What to do if my Hoymiles Inverter was shut down by remote control?
Check the status of zero export management and whether the Hoymiles microinverters were manually shut down. If the alarm still persists, further assistance may be needed.
What to do if there is a grid configuration parameter error on my Hoymiles Inverter?
Check if the grid configuration parameter is correct and upgrade it. If the fault still exists, further assistance may be needed.
Important instructions for microinverters, safety precautions for installers.
Product information changes, refer to website for latest version.
Lists the microinverter models covered in the manual.
Specifies manual is for qualified technicians only.
Explains safety symbols used throughout the manual.
FCC compliance and measures to fix interference.
Crucial safety precautions for installation and operation.
Detailed meanings of safety symbols like danger, caution, hot surface, etc.
Overview of a typical grid-tied PV inverter system components.
Explains module-level MPPT, monitoring, and low DC voltage safety.
Details the 4-in-1 microinverter configuration and its benefits.
Explains Sub-1G wireless benefits like range and interference suppression.
Lists key features like peak power, efficiency, and reliability.
Identifies and describes the microinverter's connection terminals (A, B, C).
Provides physical dimensions of the microinverter.
Guidance on optimal installation location and clearance for ventilation.
General guidelines and diagrams for wiring PV modules to the microinverter.
Lists recommended and auxiliary tools for installation.
Specifies the maximum number of microinverters per AC branch based on voltage and wire gauge.
Lists precautions for installation location, environment, and electromagnetic interference.
Lists required accessories and their descriptions.
Details the first steps of microinverter mounting on the rail.
Instructions for routing the grounding cable and torque specifications.
Steps to plan and construct the AC trunk cable for connecting microinverters.
Detailed steps for assembling AC trunk connectors and cables.
Finalizing AC connections to the distribution box and grid.
Instructions for creating an installation map using serial numbers.
Connecting PV module DC cables to the microinverter.
Steps to turn on the system breakers and energize the inverter.
Guidance on setting up the monitoring system with DTU and S-Miles Cloud.
Table listing common alarm codes, status, and handling suggestions.
Continues the list of alarm codes and troubleshooting steps.
Further entries in the troubleshooting list for various issues.
Explains the meaning of LED flashes during startup and operation.
Steps for qualified installers to inspect a malfunctioning microinverter.
Guidelines for regular maintenance and safety precautions.
Procedures for removing and replacing a microinverter, including platform updates.
Steps to disconnect and pack the microinverter for removal.
Guidelines for safely storing and transporting the microinverter.
Instructions for proper disposal of the microinverter in accordance with regulations.
Detailed technical specifications for DC input and AC output.
Covers efficiency ratings, ambient temperature, dimensions, weight, and enclosure.
Lists communication, isolation type, monitoring, compliance, and shutdown features.
Explains grid support functions, compliance, and installer role.
Accuracy tolerances for measurements like Volt, Watt, VAr, Power factor, Hz.
Details low/high voltage ride-through parameters and trip settings.
Details low/high frequency ride-through parameters and trip settings.
Specifies adjustment ranges for ramp rate and soft start features.
Defines adjustment ranges for inductive and capacitive power factors.
Details output power rating and reactive power absorption/production.
Covers output power rating and frequency-watt droop settings.
Details output power rating and volt-watt power reduction settings.
Template for recording microinverter installation details and DTU serial number.
Diagram illustrating the wiring for a 120/240V split-phase system.
Diagram illustrating the wiring for a 120/208V three-phase system.
To Next Page
General