Troubleshooting
Troubleshooting 97
My universal remote control does not
find an HP TV code.
If you want to program a universal remote control to operate your HP TV,
and HP is not listed in the supported brand codes, use a Philips TV code.
The HP remote control transmits Philips-licensed remote control codes.
After programming your universal remote control with a Philips TV code,
it can operate your HP TV functions for: volume, mute, power, and
input source.
What is the remote code for HP TVs? There is no ‘universal’ remote code because each manufacturer of
universal remote controls uses different databases and different codes. If
HP TVs are not listed among the supported modes in your universal
remote control, use a Philips TV code.
After programming your universal remote control with a Philips TV code,
it can operate your HP TV functions for volume, mute, power, and
input source.
I press Media but nothing happens. Is TV the selected device on the remote control?
Symptom Remedy (Continued)
To Next Page
Loading...
