HP 1080p - Page 22

12 HP MediaSmart HDTV User Guide
The AV Input connectors are:
■ 1: S-Vid or Video, and Audio L and R
■ 2: S-Vid or Video, and Audio L and R
To connect the set-top box:
1 Connect the set-top box input source cable(s) to
the rear of the TV, using one of the connector sets:
■ Digital High Definition Input: Connect
an HDMI cable to any of the HDMI
connectors: HDMI 1, HDMI 2, or HDMI 3.
Or
Connect a DVI-D cable and DVI-to-HDMI
converter (from digital, high-definition cable or
satellite set-top box with a DVI connector) to
HDMI 1, and left-right audio cables to Audio
In L and R.
■ Component High Definition Input:
Connect component video cables and left-right
audio cables to the Component connectors:
1: Y, Pb, and Pr, and Audio L and R
Or
2: Y, Pb, and Pr, and Audio L and R
■ Standard Definition Input: Connect an
S-Video cable, or a composite video cable,
and left-right audio cables to the AV Input
connectors:
1: S-Vid or Video, and Audio L and R
Or
2: S-Vid or Video, and Audio L and R
S-Vid connection
n
The Standard Definition Input (S-Vid, or
Video) connectors do not pass
high-definition TV signals.
c
CAUTION: Unplug power for the TV and all
connected components before connecting
the set-top box.