HP 260 G2 DM User Manual

10. Plug the combined power and data cable into the hard drive (1). Align the guide screws with the slots on
the chassis drive cage, press the hard drive down into the bay, and then slide the hard drive forward (2)
until it stops and locks into place.
11. Replace the access panel.
12. If the computer was on a stand, replace the stand.
13. Reconnect the power cord and any external devices, and then turn on the computer.
14. Lock any security devices that were disengaged when the access panel was removed.
Removing and replacing a hard drive 11

HP 260 G2 DM Specifications

General

Processor	Intel Celeron, Pentium, or Core i3/i5/i7
Storage	Up to 1 TB HDD or 128 GB SSD
Graphics	Intel HD Graphics
Operating System	Windows 10 Pro
Form Factor	Mini PC
Ports	2 x USB 3.0, 4 x USB 2.0, 1 x HDMI, 1 x VGA, 1 x RJ-45
Dimensions	175 x 175 x 34 mm
Weight	1.05 kg