7-12
Configuring Secure Socket Layer (SSL)
Configuring the Switch for SSL Operation
Notes “Zeroizing” the switch’s server host certificate or key automatically disables
SSL (sets web-management ssl to No). Thus, if you zeroize the server host
certificate or key and then generate a new key and server certificate, you must
also re-enable SSL with the web-management ssl command before the switch
can resume SSL operation.
CLI Command to view host certificates.
To view the current host certificate from the CLI you use the show crypto
host-cert command.
For example, to display the new server host certificate:
Figure 7-4. Example of show crypto host-cert command
Syntax: show crypto host-cert
Displays switch’s host certificate
Show host certificate command
To Next Page
Loading...
Need help?
General