4-10
TACACS+ Authentication
Configuring TACACS+ on the Switch
Viewing the Switch’s Current TACACS+ Server Contact
Configuration
This command lists the timeout period, encryption key, and the IP addresses
of the first-choice and backup TACACS+ servers the switch can contact.
Syntax: show tacacs
For example, if the switch was configured for a first-choice and two backup
TACACS+ server addresses, the default timeout period, and paris-1 for a
(global) encryption key, show tacacs would produce a listing similar to the
following:
Figure 4-3. Example of the Switch’s TACACS+ Configuration Listing
First-Choice
TACACS+ Server
Second-Choice
TACACS+ Server
Third-Choice
TACACS+ Server
To Next Page
Loading...
