Setting up the monitor
Attaching the monitor stand
CAUTION: Do not touch the surface of the LCD panel. Pressure on the panel may cause nonuniformity of
color or disorientation of the liquid crystals. If this occurs, the screen will not recover to its normal condition.
TIP: Consider the placement of the monitor, because the bezel might cause interfering reections from
surrounding light and bright surfaces.
1. Position the monitor on a level surface with the bottom side up.
CAUTION: Do not lay the monitor facedown when reinstalling the stand. Stress on the curvature of the
monitor panel may damage the panel if the monitor is placed facedown.
2. Secure the base (1) to the stand by inserting the screw through the base and tightening the screw (2).
Setting up the monitor 5
To Next Page
Loading...
Need help?
General
