HP 27MQ User Manual

18
3) Lift the CN503 connector from the PCB.
4) Place the new component on the PCB. Be sure that it matches the PCB footprint.
5) Solder the new component.
D-SUB connector CN101
Repair the D-SUB connector:
1) Use a soldering iron and a disordering pump to remove as much solder as possible from the
pin.
2) Use a hot air gun to melt the solder on the pins.
3) Lift the CN101 connector from the PCB.
4) Place the new component on the PCB. Be sure that it matches the PCB footprint.
5) Solder the new component.

HP 27MQ Specifications

General

Pixel pitch	0.233 x 0.233 mm
Screen shape	Flat
Backlight type	LED
Display diagonal	27 \
Display technology	LCD
Native aspect ratio	16:9
Maximum refresh rate	60 Hz
Contrast ratio (typical)	1000:1
Display number of colors	-
Digital vertical frequency	0 - 60 Hz
Digital horizontal frequency	0 - 80 kHz
Display brightness (typical)	300 cd/m²
Supported graphics resolutions	1024 x 768 (XGA)
HDMI	Yes
DisplayPorts quantity	0
AC input voltage	100 - 240 V
Power consumption (standby)	0.5 W
Power consumption (typical)	32 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Package depth	234 mm
Package width	705 mm
Package height	478 mm
Package weight	9270 g
Tilt angle range	-5 - 23 °
Panel mounting interface	100 x 100 mm
Product color	Black, Silver

Weight and Dimensions

Depth (with stand)	211.6 mm
Height (with stand)	504.9 mm
Weight (with stand)	6840 g
Depth (without stand)	50.5 mm
Width (without stand)	614.2 mm
Height (without stand)	367.9 mm
Weight (without stand)	6.84 g