To Next Page

To Previous Page

4 Removal and replacement procedures

Adherence to these procedures and precautions is essential for proper service.

Preparation for disassembly

Use this information to properly prepare to disassemble and reassemble the monitor.

1) Read the “Important safety information” and “Important service information and precautions”

sections in the “Getting started” chapter of this guide.

2) Clean the room for disassembly.

3) Identify the disassembly area.

4) Check the position that the monitors are to be placed along with the number of monitors.

Prepare the area for material flow according to the disassembly layout.

5) Be sure to have the following equipment and materials:

 Press fixture

 Working table

 Screwdriver

 Knife

 Gloves

 Cleaning cloth

 ESD protection

 Scraper bar in the following dimensions:

Questions and Answers:

Need help?

Do you have a question about the HP 27MQ and is the answer not in the manual?

HP 27MQ Specifications

General

Pixel pitch	0.233 x 0.233 mm
Screen shape	Flat
Backlight type	LED
Display diagonal	27 \
Display technology	LCD
Native aspect ratio	16:9
Maximum refresh rate	60 Hz
Contrast ratio (typical)	1000:1
Display number of colors	-
Digital vertical frequency	0 - 60 Hz
Digital horizontal frequency	0 - 80 kHz
Display brightness (typical)	300 cd/m²
Supported graphics resolutions	1024 x 768 (XGA)
HDMI	Yes
DisplayPorts quantity	0
AC input voltage	100 - 240 V
Power consumption (standby)	0.5 W
Power consumption (typical)	32 W
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Package depth	234 mm
Package width	705 mm
Package height	478 mm
Package weight	9270 g
Tilt angle range	-5 - 23 °
Panel mounting interface	100 x 100 mm
Product color	Black, Silver

Weight and Dimensions