4 1 Getting Started
Front bezel controls
Control Function
1 INPUT Press to bring out the signal selection menu.
2 EXIT If the OSD menu is on, press to save any changes made, and exit
the OSD menu.
If the OSD menu is off, pressing this button will bring out the i-Style
Color OSD menu.
If the OSD menu is off, pressing and holding this button for 1-2
seconds will bring out the Blue Light Reducer OSD menu.
3
/ : If the OSD menu is on, press to navigate backward through the
OSD menu and decrease adjustment levels.
If the OSD menu is off, pressing this button will bring out the ECO
Mode OSD menu.
If the OSD menu is off, pressing and holding this button for 10
seconds will lock/unlock the Power button.
: If the OSD menu is on, press to navigate forward through the
OSD menu and increase adjustment levels.
4 ENTER Opens the OSD menu and activates the selected OSD menu.
If the OSD menu is off, pressing and holding this button for 10
seconds will lock/unlock the all the function buttons except for the
Power button.
5 Power button Turns the monitor on or off.
6 Power light White: The monitor is on.
Orange: The monitor is in standby mode.
To Next Page
Loading...
