HP 2910 Series User Manual

HP X242 SFP+ 15m DAC Cable J9287B
Cables
Multi-Mode Cables
HP .5m Multi-mode OM3 LC/LC FC Cable AJ833A
HP 1m Multi-mode OM3 LC/LC FC Cable AJ834A
HP 2 m Multimode OM3 LC/LC FC Cable AJ835A
HP 5 m Multimode OM3 LC/LC FC Cable AJ836A
HP 15 m Multimode OM3 LC/LC FC Cable AJ837A
HP 30 m Multimode OM3 LC/LC FC Cable AJ838A
HP 50 m Multimode OM3 LC/LC FC Cable AJ839A
HP Premier Flex LC/LC OM4 2f 1m Cbl QK732A
HP Premier Flex LC/LC OM4 2f 2m Cbl QK733A
HP Premier Flex LC/LC OM4 2f 5m Cbl QK734A
HP Premier Flex LC/LC OM4 2f 15m Cbl QK735A
HP Premier Flex LC/LC OM4 2f 30m Cbl QK736A
HP Premier Flex LC/LC OM4 2f 50m Cbl QK737A
Switch Enclosure Options
Rack Mount Kit
HP 10GbE al Switch Interconnect Kit J9165A
Used to connect two switches together
Rack Mount Kit
HP X410 1U Univ 4-post Rack Mnt Kit J9583A
See Configuration
Note:1
HP X410 1U Integ Univ 4-post Rck Mnt Kit J9583AZ
See Configuration
Note:1
Configuration Rules:
Note 1 If this Mounting Kit is order with #0D1 or Z then it integrates to the HP Universal Rack. (not the
switch)
Software
QuickSpecs
HP 2910 al Switch Series
Configuration
DA - 13280 North America — Version 20 — December 12, 2013 Page 12

HP 2910 Series Specifications

General

Switching Capacity	Up to 176 Gbps
Layer	Layer 3
MAC Address Table Size	16, 000 entries
Throughput	Up to 130.9 Mpps
Power over Ethernet	PoE+ (IEEE 802.3at) on PoE+ models
Stackable	Yes (up to 4 switches)
Management	Web, CLI, SNMP
Routing Protocol	RIP
Power Supply	Internal (redundant option available)
Form Factor	1U rack-mountable
Security features	ACLs, 802.1X, RADIUS, TACACS+
Power consumption	Varies by model (e.g., 68W for 2910-24G, 460W for 2910-24G-PoE+)
Operating temperature	32°F to 113°F (0°C to 45°C)
Latency	<5 microseconds