To Next Page

To Previous Page

3-21

Virus Throttling (Connection-Rate Filtering)

Configuring and Applying Connection-Rate ACLs

< filter | ignore >

The filter option assigns policy filtering to traffic with

source IP address (SA) matching the source address in the

ACE. The ignore option specifies bypassing policy filtering

for traffic with an SA that matches the source address in

the ACE.

ip < any | host < ip-addr > | ip-addr < mask-length >

Specifies the SA criteria for traffic addressed by the ACE.

any: Applies the ACEs action (filter or ignore) to traffic

having any SA.

host < ip-addr >: Applies the ACEs action (filter or ignore)

to traffic having the specified host SA.

ip-addr < mask-length >: Applies the ACEs action (filter or

ignore) to traffic having an SA within the range defined

by either:

< src-ip-addr/cidr-mask-bits>

< src-ip-addr < mask >>

Use this criterion for traffic received from either a subnet

or a group of IP addresses. The mask can be in either

dotted-decimal format or CIDR format with the number

of significant bits. Refer to “Using CIDR Notation To

Enter the ACE Mask” on page 3-25.

Other manuals for HP 3500yl Series

Questions and Answers:

Need help?

Do you have a question about the HP 3500yl Series and is the answer not in the manual?

General