To Next Page

To Previous Page

5-11

TACACS+ Authentication

Configuring TACACS+ on the Switch

Syntax: aaa authentication

< console | telnet | ssh | web | port-access >

Selects the access method for configuration.

< enable>

The server grants privileges at the Manager privilege

level.

The server grants privileges at the Operator privilege

level. If the privilege-mode option is entered, TACACS+ is

enabled for a single login. The authorized privilege level

(Operator or Manager) is returned to the switch by the

TACACS+ server.

Default: Single login disabled.

< local | tacacs | radius >

Selects the type of security access:

local — Authenticates with the Manager and Operator

password you configure in the switch.

tacacs — Authenticates with a password and other

data configured on a TACACS+ server.

radius — Authenticates with a password and other

data configured on a RADIUS server.

[< local | none >]

If the primary authentication method fails, determines

whether to use the local password as a secondary method

or to disallow access.

aaa authentication num-attempts < 1-10 >

Specifies the maximum number of login attempts allowed in

the current session. Default: 3

Other manuals for HP 3500yl Series

Questions and Answers:

Need help?

Do you have a question about the HP 3500yl Series and is the answer not in the manual?

General