To Next Page

To Previous Page

6-27

RADIUS Authentication, Authorization, and Accounting

Configuring the Switch for RADIUS Authentication

Figure 6-10. Example of Output from show authentication Command

Figure 6-11. Example of Output from show accounting Command

HP Switch(config)# show authentication

Status and Counters - Authentication Information

Respect Privilege : Disabled

| Login Login Login

Access Task | Primary Server Group Secondary

----------- + ---------- ------------ ----------

Console | Local radius None

Telnet | Local radius None

Port-Access | Local None

Webui | Local None

SSH | Local None

Web-Auth | ChapRadius group3 None

MAC-Auth | ChapRadius group3 None

| Enable Enable Enable

Access Task | Primary Server Group Secondary

----------- + ---------- ------------ ----------

Console | Local radius None

Telnet | Radius group2 None

Webui | Local None

SSH | Local None

Server group information

HP Switch(config)# show accounting

Status and Counters - Accounting Information

Interval(min) : 0

Suppress Empty User : No

Sessions Identification : Unique

Type | Method Mode Server Group

-------- + ------ ---------- ------------

Network | None

Exec | Radius Start-Stop group2

System | Radius Stop-Only group2

Commands | Radius Start-Stop radius

Server group information

Other manuals for HP 3500yl Series

Questions and Answers:

Need help?

Do you have a question about the HP 3500yl Series and is the answer not in the manual?

General