HP 3500yl Series User Manual

7-41
Configuring RADIUS Server Support for Switch Services
Configuring and Using Dynamic (RADIUS-Assigned) Access Control Lists
Figure 7-13. Example of Output Showing Current RADIUS-Applied Features
HP Switch(config)# show port-access web-based clients 10 detailed
Port Access Web-Based Client Status Detailed
Client Base Details :
Port : 9
Session Status : authenticated Session Time(sec) : 5
Username : acluser1 MAC Address : 0017a4-e6d787
IP : n/a
Access Policy Details :
COS Map : 77777777 In Limit Kbps : 1000
Untagged VLAN : 10 Out Limit Kbps : Not Set
Tagged VLANs : 20
RADIUS-ACL List :
deny in 23 from any to 10.0.8.1/24 23 CNT
Hit Count: 1
permit in 1 from any to 10.0.10.1/24 CNT
Hit Count: 112
deny in udp from any to any 67-68 CNT
Hit Count: 7
permit in ip from any to any CNT
Hit Count: 125

HP 3500yl Series Specifications

General

Input Voltage	100-240 VAC
Ports	24/48 x 10/100/1000 ports (depending on model)
Uplink Ports	4 x SFP ports
Layer	Layer 3
Management	CLI, Web, SNMP
Routing Protocol	RIP, OSPF, BGP
Operating Temperature	0°C to 45°C
Stacking	Yes
Memory	512 MB
VLAN Support	Yes
Layer 3 Routing	Yes
Security Features	ACLs, 802.1X
Power Supply	Internal
Power over Ethernet (PoE)	Optional