HP 3500yl Series User Manual

10-4
IPv4 Access Control Lists (ACLs)
Overview of Options for Applying IPv4 ACLs on the Switch
clients. For information on RADIUS-assigned ACLs assigned by a RADIUS
server, refer to the chapter titled “Configuring RADIUS Server Support for
Switch Services”.
Note This chapter describes the IPv4 ACL applications you can statically configure
on the switch. For information on static IPv6 ACL applications, refer to the
chapter titled “IPv6 Access Control Lists (ACLs)” in the latest IPv6 Configu-
ration Guide for your switch.

HP 3500yl Series Specifications

General

Input Voltage	100-240 VAC
Ports	24/48 x 10/100/1000 ports (depending on model)
Uplink Ports	4 x SFP ports
Layer	Layer 3
Management	CLI, Web, SNMP
Routing Protocol	RIP, OSPF, BGP
Operating Temperature	0°C to 45°C
Stacking	Yes
Memory	512 MB
VLAN Support	Yes
Layer 3 Routing	Yes
Security Features	ACLs, 802.1X
Power Supply	Internal
Power over Ethernet (PoE)	Optional