HP 3500yl Series User Manual

10-102
IPv4 Access Control Lists (ACLs)
Displaying ACL Configuration Data
Figure 10-35. Example of Listing the ACL Assignments for Ports and Trunks
HP Switch(config)# show access-list ports all
Access Lists for Port B1
Inbound Ipv6: List-01-Inbound
Access Lists for Port B12
Inbound : 101
Type : Extended
Inbound Ipv6: Accounting
Access Lists for Port Trk2
Inbound Ipv6: Accounting
Access Lists for Port Trk5
Inbound : Marketing
Type : Extended
• An IPv6 ACL is filtering
inbound traffic on port B1.
• Both an IPv4 ACL and an IPv6
ACL are filtering inbound IPv4
and IPv6 traffic, respectively,
on port B12.
• An IPv6 ACL is filtering
inbound IPv6 traffic on Trunk 2
(Trk2).
• An IPv4 ACL is filtering
inbound IPv4 traffic on Trunk 5
(Trk5).

HP 3500yl Series Specifications

General

Input Voltage	100-240 VAC
Ports	24/48 x 10/100/1000 ports (depending on model)
Uplink Ports	4 x SFP ports
Layer	Layer 3
Management	CLI, Web, SNMP
Routing Protocol	RIP, OSPF, BGP
Operating Temperature	0°C to 45°C
Stacking	Yes
Memory	512 MB
VLAN Support	Yes
Layer 3 Routing	Yes
Security Features	ACLs, 802.1X
Power Supply	Internal
Power over Ethernet (PoE)	Optional