EasyManuals Logo

HP 3500yl Series User Manual

HP 3500yl Series
778 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #57 background imageLoading...
Page #57 background image
2-3
Configuring Username and Password Security
Overview
Menu Interface: System Information screen (Select “2. Switch Configu-
ration.)
CLI: Use the console inactivity-timer < 0 | 1 | 5 | 10 | 15 | 20 | 30 | 60 | 120 >
Notes The manager and operator passwords and (optional) usernames control
access to the menu interface, CLI, and WebAgent.
If you configure only a Manager password (with no Operator password), and
in a later session the Manager password is not entered correctly in response
to a prompt from the switch, then the switch does not allow management
access for that session.
If the switch has a password for both the Manager and Operator levels, and
neither is entered correctly in response to the switch’s password prompt, then
the switch does not allow management access for that session.
Passwords are case-sensitive.
When configuring an operator or manager password a message will appear
indicating that (USB) autorun has been disabled. For more information on the
autorun feature, refer to the Appendix A on “File Transfers” in the Manage-
ment and Configuration Guide for your switch.
Caution If the switch has neither a Manager nor an Operator password, anyone
having access to the switch through either Telnet, the serial port, or the
WebAgent can access the switch with full manager privileges. Also, if you
configure only an Operator password, entering the Operator password
enables full manager privileges.
The rest of this chapter covers how to:
Set passwords
Delete passwords
Recover from a lost password
Maintain front-panel security

Table of Contents

Other manuals for HP 3500yl Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP 3500yl Series and is the answer not in the manual?

HP 3500yl Series Specifications

General IconGeneral
Input Voltage100-240 VAC
Ports24/48 x 10/100/1000 ports (depending on model)
Uplink Ports4 x SFP ports
LayerLayer 3
ManagementCLI, Web, SNMP
Routing ProtocolRIP, OSPF, BGP
Operating Temperature0°C to 45°C
StackingYes
Memory512 MB
VLAN SupportYes
Layer 3 RoutingYes
Security FeaturesACLs, 802.1X
Power SupplyInternal
Power over Ethernet (PoE)Optional

Related product manuals