To Next Page

To Previous Page

13-60

Configuring Port-Based and User-Based Access Control (802.1X)

Displaying 802.1X Configuration, Statistics, and Counters

Figure 13-14.Example of show port-access authenticator session-counters Command

Syntax: show port-access authenticator session-counters [port-list]

Displays information for active 802.1X authentication ses-

sions on all switch ports or specified ports that are enabled

as 802.1X authenticators, including:

• 802.1X frames received and transmitted on each port

• Duration and status of active 802.1X authentication

sessions (in-progress or terminated)

• User name of 802.1X supplicant included in 802.1X

response packets, configured with the aaa port-access

supplicant identity <username> command (see page 13-49).

802.1X configuration information for ports that are not

enabled as an 802.1X authenticators is not displayed.

HP Switch(config)# show port-access authenticator session-counters

Port Access Authenticator Session Counters

Port-access authenticator activated [No] : Yes

Allow RADIUS-assigned dynamic (GVRP) VLANs [No] : No

Session Session

Port Frames In Frames Out Time(sec.) Status User

---- ---------- ----------- ----------- ----------- -------

2 45623 45623 20 in-progress bert

Other manuals for HP 3500yl Series

Questions and Answers:

Need help?

Do you have a question about the HP 3500yl Series and is the answer not in the manual?

General