To Next Page

To Previous Page

13-66

Configuring Port-Based and User-Based Access Control (802.1X)

Displaying 802.1X Configuration, Statistics, and Counters

Table 13-2. Output for Determining Open VLAN Mode Status (Figure 13-18, Lower)

Status Indicator Meaning

Status Closed: Either no client is connected or the connected client has not received authorization through

802.1X authentication.

Open: An authorized 802.1X supplicant is connected to the port.

Current VLAN ID < vlan-id >: Lists the VID of the static, untagged VLAN to which the port currently belongs.

No PVID: The port is not an untagged member of any VLAN.

Current Port CoS Refer to the section describing RADIUS support for Identity-Driven

Management—IDM—in chapter 6, “RADIUS Authentication, Authorization,

and Accounting” in this guide.

% Curr. Rate Limit

Inbound

Syntax: show vlan < vlan-id >

Displays the port status for the selected VLAN, including an

indication of which port memberships have been temporarily

overridden by Open VLAN mode.

Other manuals for HP 3500yl Series

Questions and Answers:

Need help?

Do you have a question about the HP 3500yl Series and is the answer not in the manual?

General