Removing Template Parameters
To remove parameters in an existing template, issue the settemplate -remove <option>
<template_name> command, where:
• <option> is the parameter being removed from the template. The parameters are the options
that you specified during the creation of the template. It is not necessary to specify the
parameter’s value during removal.
• <template_name> is the name of the template being modified.
Removing Templates
Removing a template deletes the template from the system, but does not delete objects created with
that template.
To remove a template from the system, issue the removetemplate <template_name> command,
where <template_name> is the name of the template being removed.
You can optionally remove templates matching a specific pattern by issuing the removetemplate
-pat <template_name|pattern> command. For details about this option, see the HP 3PAR
Command Line Interface Reference.
104 Creating and Applying Templates
To Next Page
Loading...
