5. Select Host Settings and enter the following information:
• Under Discover Host, select one of the following options:
• IP Address: Enter the IP address of the host.
• Subnet: To discover hosts for a range of IP addresses:
1. Enter the starting IP address in Start at IP Address.
2. Enter the limiting IP address in Stop at IP Address.
• Enter the access information as required, to initiate host discovery.
• Click Discover Hosts to discover the physical hosts and the associated virtual machines.
Obtaining a report from HP
Once you have configured SAN Visibility for data collection, you can obtain a report. There are
two methods for obtaining a report:
• Automatically—Automatically emails your data to HP when collection is complete. You will
need to know the SMTP address of your mail server. Select the SMTP address from the list.
Use this method if you have external e-mail access from your environment.
• Manually—Requires that you send your data manually to HP to obtain a SAN Visibility report.
Use this method if you do not have external email access.
16 Preparing for the upgrade
To Next Page
Loading...
Need help?
General
