Figure 5 Sample SAN Visibility report
Reading the report
1. Save the attached .hppr file to a preferred location. Do not change the file extension.
2. Double-click the saved file to extract the processed report. The report is stored at:
<Install_Dir>\ExtractedProcessReports\<SAN Name>\
3. Click on the .hppr file to open the report in your browser.
4. In the navigation pane, click High Level Fabric Summary.
The High Level Fabric Summary window opens (Figure 5 (page 19)). This report will identify
the firmware and/or driver version that is currently running on your switches (including the
HSV300–S embedded switch controller) and HBAs.
Checking and upgrading your SAN infrastructure 19
To Next Page
Loading...
Need help?
General
