14
–42 Set: DD.MM.YY date format.
Clear:* MM/DD/YY date format.
–43 Set: Unacknowledged repeat alarms are not
rescheduled.
Clear:* Unacknowledged repeat alarms are
rescheduled.
–44 Set: Acknowledged alarms are retained in the
alarm list.
Clear:* Acknowledged alarms are deleted from alarm
list.
–49 Set: Fixed mode with –50 clear, engineering mode
with –50 set.
Clear:* Standard mode with –50 clear, scientific mode
with –50 set.
–50 Set: Engineering mode with –49 set, scientific
mode with –49 clear.
Clear:* Fixed mode with –49 set, standard mode with
–49 clear.
–51 Set: Fraction mark is a comma.
Clear:* Fraction mark is a period.
–52 Set: Level 1 object is displayed on one line.
Clear:* Level 1 object is displayed on multiple lines.
–53 Set: All parentheses are shown in algebraic
expressions.
Clear:* Extra parentheses in algebraic expressions
are removed.
–54 Set: Small matrix values not set to 0; DET does not
round.
Clear:* Small matrix values are set to 0; DET rounds.
–55 Set: Most-recent arguments are not saved.
Clear:* Most-recent arguments are saved.
–56 Set: Beep tone is enabled.
Clear:* Beep tone is disabled.
–57 Set: Alarm tone is disabled.
Clear:* Alarm tone is enabled.
–58 Set: Parameter and variable INFO not displayed.
Clear:* Parameter and variable INFO are displayed.
–60 Set: Press alpha once for alpha mode lock.
Clear:* Press alpha twice for alpha mode lock.
–61 Set: Press
<~
once for user mode lock.
Clear:* Press
<~
twice for user mode lock.
–62 Set: User mode on.
Clear:* User mode off.
–63 Set: User-defined
\
is activated.
Clear:*
\
evaluates the command line.
–64 Set: The last GETI or PUTI wrapped index (to 1).
Clear:* The last GETI or PUTI does not wrap the
index.
–65 Set: Displays only the first level over multiple lines.
Clear:* Displays all levels over multiple lines.
–66 Set: Displays long strings in single lines.
Clear:* Displays long strings in multiple lines.
Flag Description of modes (* = default)
To Next Page
Loading...
Need help?
General
