HP 49g Pocket Guide

15
–67 Set: When the clock shows (see flag –40), it is an
analog display.
Clear:* When the clock shows (see flag –40), it is a
digital display.
–68 Set: Command line automatically indents.
Clear:* Command line does not automatically indent.
–69 Set: Full-screen editing allowed.
Clear:* The cursor cannot move out of the text line.
–70 Set: →GROB can accept multi-line strings.
Clear:* →GROB can accept only single-line strings.
–71 Set: No addresses in ASM.
Clear:* Add addresses in ASM.
–72 Set: The stack display uses mini-font.
Clear:* The stack display uses the current font.
–73 Set: Command line editing uses mini-font.
Clear:* Command line editing uses the current font.
–74 Set: The stack is left-justified.
Clear:* The stack is right-justified.
–76 Set: File Manager purges need no confirmation.
Clear:* File Manager purges need confirmation.
–79 Set: Algebraic objects display on the stack in
standard form.
Clear:* Algebraic objects appear on the stack in
textbook form.
–80 Set: Textbook stack display uses minifont.
Clear:* Textbook stack display uses the current font.
–81 Set: Editing a textbook grob uses minifont.
Clear:* Editing a textbook grob uses current font.
–82 Set: Minifont used to edit algebraic in textbook
mode.
Clear:* Current font used to edit algebraic in textbook
mode.
–83 Set: Grob description displayed on the stack.
Clear:* Grob contents displayed on the stack.
–85 Set: SYSRPL stack display.
Clear:* Standard stack display.
–86 Set: Program prefix off.
Clear:* Program prefix on.
–90 Set:* Choose lists displayed in mini-font.
Clear: Choose lists displayed in the current font.
–91 Set: Matrix Writer operates as a list of lists.
Clear:* Matrix Writer accepts arrays only.
–92 Set: MASD SYSRPL.
Clear:* MASD assembler.
–94 Set: In RPN mode, results are not stored in
LASTCMD.
Clear:* In RPN mode, results are stored in
LASTCMD.
–95 Set: Algebraic mode.
Clear:* RPN mode.
–97 Set: Lists are displayed vertically.
Clear:* Lists are displayed horizontally only.
Flag Description of modes (* = default)

HP 49g Specifications

General

Model	HP 49g
Type	Graphing Calculator
Display	131 x 64 pixels
Processor	Saturn
Memory	512 KB RAM, 2 MB ROM
Power Supply	3 x AAA batteries
Connectivity	RS-232
Programming	RPL