HP 6100 - Page 3

Array management and replication
To install HP P6000 Command View, HP P6000 Business
Copy, HP P6000 Continuous Access, and thin
provisioning licenses:
1. You can save the license key file (.txt or .dat)
by clicking the Save license key/password file for
[product number] link at the end of the certificate or
copy and paste the license key from the certificate
when instructed in step 5.
2. Launch HP P6000 Command View and select the
appropriate array under Storage Systems.
3. Click the Licensing tab on the Storage System
Properties page.
4. Click Install Licenses.
5. Ifyousavedthelicensekeyina.txt or .dat file
in step 1, open it now. Copy and paste the license
key from the file or from the license certificate into
the form provided (be sure to include the quotation
marks and the space at the end of the license). For
multiple licenses, separate each license key by
pressing Enter between each entry.
6. Click Install Licenses.
This complete s the procedure for ins talling HP P6000
Command View, HP P6000 Business Copy, HP
P6000 Continuous Access, and thin provisioning
licenses.
Usethelicenseimporttool
1. Save the license key file (.txt or .dat)byclicking
the Save license key/password file for [product
number] link at the end of the certificate.
2. On the HP P6000 Command View main page, click
Server Options (upper-right, white lettering in the
blue banner).
3. On the Management Server Options page, click
Import/Export Licenses.
4. Browse to the location of the saved license file.
5. On the Import/Export Licenses page, click Import
Licenses.
6. Click OK.
This completes the procedure for entering licenses
using the license import tool in HP P6000 Command
View.
Page 3