13
Category File name format Content
Diagnostic log diagfile.log
Diagnostic log messages about device operation, including the
following items:
• Parameter settings used when an error occurs.
• Information about device startup errors.
• Handshaking information between member devices when a
communication error occurs.
Operating
statistics
file-basename.gz
IMPORTANT:
Collecting operating statistics decreases system performances.
Current operation statistics for feature modules, including the
following items:
• Device status.
• CPU status.
• Memory status.
• Configuration status.
• Software entries.
• Hardware entries.
Collecting common log messages
1. Save the common log messages from the log buffer to a log file.
By default, the log file is saved in the logfile directory of the flash memory on each member device.
<Sysname> logfile save
The contents in the log file buffer have been saved to the file
flash:/logfile/logfile.log
2. Identify the log file on each member device:
# Display the log file on the master device.
<Sysname> dir flash:/logfile/
Directory of flash:/logfile
0 -rw- 21863 Jul 11 2013 16:00:37 logfile.log
524288 KB total (107944 KB free)
# Display the log file on each subordinate device:
<Sysname> dir slot2#flash:/logfile/
Directory of slot2#flash:/logfile
0 -rw- 21863 Jul 11 2013 16:00:37 logfile.log
524288 KB total (107944 KB free)
3. Transfer the files to the desired destination by using FTP or TFTP. (Details not shown.)
Collecting diagnostic log messages
1. Save the diagnostic log messages from the diagnostic log file buffer to a diagnostic log file.
To Next Page
Loading...
