24
LEDs
Table 6 LED description
LED mark Status Description
UID
Blue Switch ID selected.
Off Switch ID not selected.
Green The blade switch has started properly.
Flashing yellow The blade switch is performing POST, or is faulty.
Off The blade switch is not powered on, or is faulty.
SFP+
Steady green The port is operating at 10 Gbps.
Flashing green The port is sending or receiving data at 10 Gbps.
Steady yellow The port is operating at 1 Gbps.
Flashing yellow The port is sending or receiving data at 1 Gbps.
Off No link is present on the port.
QSFP+
Steady green The port is operating at 40 Gbps.
Flashing green The port is sending or receiving data at 40 Gbps.
Steady yellow The port is operating at 10 Gbps.
Flashing yellow The port is sending or receiving data at 10 Gbps.
Off No link is present on the port.
Ports
Console port
Every HP 6125XLG blade switch has one console port on its front panel.
Table 7 Console port specifications
Item Specification
Connector type
RJ-45
Compliant standard
EIA/TIA-232
Transmission baud rate 9600 bps (default) to 115200 bps
Services
• Provides connection to an ASCII terminal.
• Provides connection to the serial port of a local PC or a remote terminal running
terminal emulation program.
To Next Page
Loading...
