To Next Page

To Previous Page

6. Remove the display panel assembly (3) from the back cover.

Reverse this procedure to install the back cover.

Battery

Description Spare part number

Battery, 3.7-V, 2800-mAh, Li-ion (includes cables) 775000-001

Before removing the battery, follow these steps:

1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on,

and then shut it down through the operating system.

2. Disconnect the power from the tablet by unplugging the power cord from the tablet.

3. Disconnect all external devices from the tablet.

4. Remove the back cover (see

Back cover on page 14).

WARNING! To reduce potential safety issues, use only the battery provided with the tablet, a

replacement battery provided by HP, or a compatible battery purchased from HP.

CAUTION: Removing a battery that is the sole power source for the tablet can cause loss of

information. To prevent loss of information, save your work or shut down the tablet through Windows

before removing the battery.

Remove the battery:

16 Chapter 5 Removal and replacement procedures

Questions and Answers:

Need help?

Do you have a question about the HP 7 Plus and is the answer not in the manual?

HP 7 Plus Specifications

General