A-Class System Service
Replacing an A-Class Server Exchange Base Unit (EBU)
Chapter 3
100
Replacing an A-Class Server Exchange Base Unit (EBU)
Overview
When troubleshooting a defective A-Class server has determined that the fault lies in a
portion of the server that cannot be replaced at the site, field-replaceable components
must be removed prior to exchanging the defective server for an operational unit. This
“stripped-down” server is the EBU.
The following subsections apply:
• Removable Components
• Move the Components to the EBU
— Apply New Labels
— Labels Applicable to the A5183A (A180C) EBU
• Reinstall the System
• Restart the System
Ensure that you obtain required Web Console configuration data (user names and
passwords, IP address, etc.) prior to replacing the EBU.
NOTE Web Console user login information and passwords are not retained by, and cannot be
acquired by, the Web Console. This information is kept by the Web Console
Administrator or System Manager.
To Next Page
Loading...
Need help?
General