HP 800 User Manual

A-Class Server Installation
A-Class Server Site Preparation
Chapter 2
25
Cabinet Minimum Service Access Requirements
Input Power Requirements
Input power requirements for the A-Class server are listed as follows:
• Nominal Input Voltage (VAC): 100 - 240
A4901A Factory
Integrated 1.6m x
19” Cabinet
33 16 59.7 x 100.3 x
161.3
23.5 x 39.5 x 63.5
A4902A Factory
Integrated 2.0m x
19” Cabinet
41 20 59.7 x 100.3 x
196.9
23.5 x 39.5 x 77.5
J1502A Field Integrated
1.25m x 19”
Cabinet
25 12 59.7 x 100.3 x
125.7
23.5 x 39.5 x 49.5
J1501A Field Integrated
1.6m x 19”
Cabinet
33 16 59.7 x 100.3 x
161.3
23.5 x 39.5 x 63.5
J1500A Field Integrated
2.0m x 19”
Cabinet
41 20 59.7 x 100.3 x
196.9
23.5 x 39.5 x 77.5
C2785A Field Integrated
1.1m x 19”
Cabinet
21 10 61 x 91.4 x 111.8 24 x 36 x 44
C2786A Field Integrated
1.6m x 19”
Cabinet
32 16 61 x 91.4 x 162.6 24 x 36 x 64
C2787A Field Integrated
2.0m x 19”
Cabinet
41 20 61 x 91.4 x 203.2 24 x 36 x 80
Cabinet
Product
Number
Description
EI
A
Max.
A-Clas
s
Server
s
External Dimensions (width x
depth x height)
Centimeters Inches
Access
Location
Rear 61 cm (24 in.)
Sides NA (NA)
Front 100.3 (39.5
in.)

HP 800 Specifications

General

Brand	HP
Model	800
Category	Server
Language	English