Table 7-4 System Board Drive Connections
No. System Board Connector System Board Label Color
1 SATA0 SATA0 dark blue
2 SATA1 SATA1 white
3 SATA2 SATA2 light blue
4 eSATA ESATA black
5 Media Card Reader MEDIA black
Removing an External 5.25-inch Drive
CAUTION: All removable media should be taken out of a drive before removing the drive from the
computer.
To remove a 5.25-inch external drive:
1. Prepare the computer for disassembly (
Preparation for Disassembly on page 90).
2. If the computer is on a stand, remove the computer from the stand.
3. Remove the access panel (
Computer Access Panel on page 99).
4. Rotate the drive cage to its upright position.
Figure 7-27 Rotating the Drive Cage Up
Drives 115
To Next Page
Loading...
