Front Bezel
NOTE: Front bezel appearance may vary by model.
1. Prepare the computer for disassembly (Preparation for Disassembly on page 35).
2. Remove the computer access panel (
Computer Access Panel on page 43).
3. Lift up the three tabs on the side of the bezel (1), then rotate the bezel off the chassis (2).
Figure 6-12 Removing the Front Bezel
To install the front bezel, reverse the removal procedure.
44 Chapter 6 Removal and Replacement Procedures Convertible Minitower (CMT) Chassis
To Next Page
Loading...
