17. 16 MHz PLL Adjustment
8. Adjust A2R152 (16 MHz PLL ADJ) until the microwave frequency counter reads
14.4 MHz
6200
KHz.
9. Reconnect W22 to
A2J8.
The microwave frequency counter should read 16 MHz. If the
counter reads 16 MHz and the display is still distorted, perform the display adjustments in
“Display Adjustment,” in this’chapter.
10. On the spectrum analyzer, press (CAL), REXICN LO arrd IF to clear any error messages.
Adjustment Procedures 2-65
To Next Page
Loading...
