Cable Color Code
Coaxial cables and wires will be identified in the procedures by reference designation or name
followed by a color code. The code is identical to the resistor color code. The first number
indicates the base color with second and third numbers indicating any colored stripes. For
-
example, W2
3,
coax 93, indicates a white cable with an orange stripe.
Table 4-1. Required Tools
Description
5/16-inch
open-end wrench
3 mm hex (Allen) wrench
4 mm hex (Allen) wrench
No. 4 hex (Allen) wrench
No. 6 hex (Allen) wrench
7 mm nut driver
3/8-inch
nut driver
7/16-inch
nut driver
9/16-inch
nut driver (drilled out, end covered
with heatshrink tubing)
Small No. 1 pozidrive screwdriver
Large No. 2 pozidrive screwdriver
T-8 TORX screwdriver
T-10 TORX screwdriver
T-15 TORX screwdriver
Long-nose pliers
Wire cutters
HP Part Number
8720-0015
8710-1366
8710-1164
5020-0288
5020-0289
8710-1217
8720-0005
8720-0006
8720-0008
8710-0899
8710-0900
8710-1614
8710-1623
8710-1622
8710-0030
8710-0012
Assembly Replacement 4-3
To Next Page
Loading...
